Appendix C: System Messages
2715 User Manual
C–11
PRINTER IS NOT CONNECTED
Connect printer to appropriate port. Check printer cable.
PRINTER OUT OF PAPER
Reload printer paper.
PROGRAM NOT EXECUTABLE
The selected user-defined program is corrupted or too big to fit into available
internal memory. Delete and resave the affected program.
PROTECTED FILE
Occurs when attempting to delete a file that is protected.
QUERY NOT AVAILABLE
Query attempted on function for which there is no query response.
QUIET LINE VERIFICATION FAILED
The 2715 was unable to find the quiet line used to take in-service Carrier-to-
Noise and Composite Second Order measurements.
REAL TIME CLOCK HW FAILURE
Firmware/hardware error. Contact your local Tektronix service center or
representative if message persists.
REAL TIME CLOCK NOT INSTALLED
2715 cannot detect presence of real-time clock.
REFERENCE LEVEL HAS NEW RANGE LIMITS
The reference level range limits have changed because the preamp or
external ATTEN/AMPL mode is activated. The reference level itself does
not change.
REFERENCE NORMALIZATION FAILED
Perform the reference normalization again, checking for the presence of the
correct external reference frequency and its correct entry from the keypad, if
required. Contact your local Tektronix service center or representative if
message persists.
REGISTER VALUE NOT ALLOWED
A storage register value was utilized that is not legal for the requested
function. For example, the register value 1 was used with the GPIB
command STOre. This attempts to store settings in the factory default
power-up register, a reserved register.
REMOVE PROTECTION FIRST
The selected user-defined program cannot be deleted until its file protection
is removed.
RUNTASK: CANNOT START PROCESS
Firmware error. Contact your local Tektronix service center or representative
if message persists.
Содержание 2715
