manualshive.com logo in svg

Tektronix 2715, Руководство пользователя

Компактный и надежный измерительный прибор PeakTech 2715 обеспечивает точные измерения. Для правильной настройки и использования устройства, убедитесь загрузить бесплатное руководство по эксплуатации на нашем сайте. Основные функции и характеристики описаны в руководстве. Узнайте больше на manualshive.com.

Поделиться
Скачать
background image

WARRANTY

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year
from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either
will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the
defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the
warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for
packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.
Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the
Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any
other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting
from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair
damage resulting from improper use or connection to incompatible equipment; or c) to service a product that has been
modified or integrated with other products when the effect of such modification or integration increases the time or
difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THIS PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESSED OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Содержание 2715









































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2715

RayTek GP Series Operating Instructions Manual preview
GP Series
Бренд: RayTek Страницы: 72
Magnetrol A10 Installation And Operating Manual preview
A10
Бренд: Magnetrol Страницы: 40
E+E Elektronik EE772 Manual preview
EE772
Бренд: E+E Elektronik Страницы: 32
Vanguard Instruments II Series Operating Instructions Manual preview
II Series
Бренд: Vanguard Instruments Страницы: 24
Hardy Barth eCB1-LR Configuration Manual preview
eCB1-LR
Бренд: Hardy Barth Страницы: 27
jenway PFP7 Operating Manual preview
PFP7
Бренд: jenway Страницы: 50
jenway 7300 Operating Manual preview
7300
Бренд: jenway Страницы: 62
CONDTROL Vector 30 User Manual preview
Vector 30
Бренд: CONDTROL Страницы: 8
GF Signet FlowtraMag 2580 Series Operating Instructions Manual preview
Signet FlowtraMag 2580 Series
Бренд: GF Страницы: 20
Ocea Soft Cobalt 2 Installation Manual preview
Cobalt 2
Бренд: Ocea Soft Страницы: 19
Lutron Electronics SL-4013 Operation Manual preview
SL-4013
Бренд: Lutron Electronics Страницы: 13
H-Star SS-90X Owner'S Manual preview
SS-90X
Бренд: H-Star Страницы: 36
ESP LTD KH-602 Owner'S Manual & Warranty Information preview
LTD KH-602
Бренд: ESP Страницы: 12
Raytech TR-MARK III Instruction Manual preview
TR-MARK III
Бренд: Raytech Страницы: 7
Velleman-Kit K4307 Manual preview
K4307
Бренд: Velleman-Kit Страницы: 9
YOKOGAWA Vigilant Plant MR20000 User Manual preview
Vigilant Plant MR20000
Бренд: YOKOGAWA Страницы: 230
PCE Health and Fitness VT 3800 User Manual preview
VT 3800
Бренд: PCE Health and Fitness Страницы: 66
AccuEnergy AcuMesh User Manual preview
AcuMesh
Бренд: AccuEnergy Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды