![background image](http://html1.mh-extra.com/html/team-losi/bk2/bk2_owners-manual_4004840028.webp)
135
139
137
134
138
136
140
110
q
1. Inspect the inside of the Tires [front (134), rear (135)] for any excess material. If present, trim excess rubber to ensure proper seating of
the Tire bead on the Wheel [front (136) , rear (137)]. During Tire assembly, make sure that all lettering on the sidewall of the Tires faces to the
outside of the Wheel.
*NOTE: Do not set Tires on furniture as they may leave permanent stains.
It is recommended that you dampen a corner of a cloth with some rubbing alcohol and use it to clean off any residue from the bead of the
Tire to ensure a clean gluing surface. Be sure to let the alcohol on the Tire dry before inserting the Foam Insert into the Tire.
q
2. Insert the front Foam Liners (138) into the front Tires. Pull the front Tires over the front Wheels and squeeze the Tires to properly seat
the bead into the grooves of the Wheels. Make certain that the Foam Liners are not pinched between the Tires and the Wheels.
q
3. Insert the rear foam Tire Liners (139) into the rear Tires. Pull the rear Tires over the rear Wheels and squeeze the Tires to properly seat
the bead into the grooves of the Wheels. Make certain that the Foam Liners are not pinched between the Tires and the Wheels.
Team Losi Tire Glue (A-7880 "Thick", A-7881 "Thin") is the best Glue available for gluing R/C car Tires. This Glue was produced
specifically for this purpose. The Team Losi (A-7884) off-road Tire Gluing kit is also available to get the job done right. It includes a bottle of
glue, an applicator tube, and a ten rubber bands. The rubber bands will be used to properly seat and hold the Tire bead into the Wheel.
IMPORTANT NOTE:
Allow the Glue to dry thoroughly before continuing. Read and follow adhesive manufacturers' safety warnings
regarding use.
q
4. The tires now need to be glued to the wheels. This can be done by using a fast-curing superglue or cyanoacrylate glue, available at your
local hobby shop. Install a Tire gluing rubber band to around the outside of the Tire, inline with the bead to hold it onto the Wheel. Now slightly
pull back the bead from the Wheel and apply a thin bead of glue between the Tire bead and the Wheel all the way around, wait for this side to
dry and do the same to the other side until the tire is firmly adhered to the wheel. Allow the glue to dry thoroughly before continuing.
q
5. Install the front Wheels to the front Stub Axles (30) by lining up the hex on the Axle with the Hex area in the front Wheel.
q
6. Secure the front Wheels by threading a 4-40 Locknut (110) onto each of the front Axles and tightening.
q
7. Mount the rear Wheels to the rear Axles (62) by lining up the Roll Pin (69) in the rear Axle with the groove in the rear Wheel and pushing
the Wheel all the way onto the Axle, making sure the Roll Pin is lined up with the slot on the Wheel.
q
8. Secure the rear Wheels by threading the 8-32 Locknuts (140) on to the Rear Axles and tightening.
BAG F
24
Step F-1
Figure 52
Tire Mounting and Install:
110
140