![background image](http://html1.mh-extra.com/html/team-losi/bk2/bk2_owners-manual_4004840011.webp)
28
11
1
10
47
BAG B (Continued)
7
Step B-11
Step B-12
There is a small container/package of White Grease in this bag.
It is recommended that this be applied to the threads of the Turn-
buckles before trying to thread on the plastic Rod Ends.
*NOTE: The two ends of the turnbuckle are threaded opposite.
The end closest to the groove, next to the square, has standard
right-hand threads, the other end has left-hand threads. This allows
the length of the Tierods, once installed, to be adjusted without
removing them.
q
1. Thread a Plastic Rod End (45) onto each End of a
1-7/8" Turnbuckle (72). Tighten both Rod Ends equally until the Rod
is the same length as the Rod in Figure 17B. Make two of these Tierod
assemblies.
*NOTE:
Assure that the grooves on all of the
front
Turnbuckles
are located on the drivers
right
-hand side for easier adjustment
later.
q
1. Place a "Foam thing" (47) over the Ball Studs (10) in each of the
Spindle (28), (29).Snap one end of a steering Tierod assembly (Figure
17B) to the Ball Stud (11) in the steering Servo Saver Bottom (1). Snap
the other end to the Ball Stud (10) in the left Spindle (28).
q
2. Attach the second steering Tierod to the right side of the car.
Figure 17A
Figure 17B
45
Steering Tierod:
Steering Tierod Install:
Figure 18
72
72
45