![background image](http://html1.mh-extra.com/html/team-losi/bk2/bk2_owners-manual_4004840017.webp)
BAG D (Continued)
13
Step D-4
Step D-5
q
1. Insert a 5mm x 8mm Ball Bearing (80) into the center of the Diff
Gear (81).
q
2. Press a 3/32" carbide Diff Ball (82) into each of the 12 small holes
in the Diff Gear. There should be a total of twelve Balls installed.
IMPORTANT NOTE:
There are two sets of Balls in Bag D. Be
certain to use the Balls that are packaged separatly (12 total) in Step
D-4. There is a second set of eight 5/64" Balls packaged with Thrust
Washers in the bag. These Balls will be used in Step D-6.
Figure 31
Diff Gear:
Diff Gear to Male Outdrive:
Figure 30
q
1. Apply a small bead of clear Diff Grease (78) to the exposed side
of the Diff Ring (79). Carefully place the Diff Gear(81) over the bearing
boss, so the Diff Balls (82) and Diff Gear rest flat against the Diff Ring.
IMPORTANT NOTE:
It is a good idea to hold the Diff Nut in
place, with the Allen Wrench, so the Diff Nut is not pushed out of the
Outdrive/Diff Half.
80
82
80
82
81
GREASE BOTH
SIDES
79
81
82
GREASE