TAMS MasterControl 40-01007, Руководство пользователя

Страница: 19 / 58

MasterControl English
Page 6.1
6. Adjusting parameters of the digital control
All parameters of the digital control are set in the menu.
Navigating through the menu
Enter the menu by pressing 0 / menu. When first entering, it displays the locomotive menu,
otherwise the last called menu point.
An arrow in the upper left corner shows the possible actions:
Navigate to another menu point on the same level or go the next higher / lower level
Enter or change values of existing settings.
To navigate through menu levels or different menu points the keys # / ok, * / esc and the
speed control knob are used.
Please note : You can alternatively enter values by
pressing # / ok or
pushing the speed control knob.
For better readability the following sections do not mention both methods. Whenever you read
“press # / ok to confirm your input“, pressing the speed control knob is also possible.
Display Action Button
Call the menu Press 0 / menu.
Navigating forward
(on the same menu level) Turn the speed control knob clockwise.
Navigating backwar ds
(on the same menu level) Turn the speed control knob counter
clockwise.
Navigating to the
next lower menu level Press # / ok
or press the speed knob.
Navigating to the
next higher menu level Press * / esc.
Moving the cursor to the right
(if displayed) Turn the speed control knob clockwise.
(not functional when entering names)
Moving the cursor to the left
(if displayed) Turn the speed control knob counter
clockwise.
Changi ng the displayed value
Turn the speed control knob or enter a
value using the keypad. (Choosing a
locomotive in the database by entering its
name on the keypad is not possible!)
Entering input and exiting menu point
Press # / ok
or press the speed knob.
Cancel input Press * / esc.