TAMS MasterControl 40-01007, Руководство пользователя

Страница: 16 / 58

English MasterControl
Page 5.2
Programming modes in the D CC format
The MasterControl supports programming and readi ng data in the following DCC programming
types:
CV-programming – byte wise and bitwise
Register programming
Page programming
Main track programming
Section 11. Background information
Driving locomotive and fu nction decoders
Depending on the data format, you have the following possibilities:
Motorola format DCC format
Number of locomotive addresses 255 10239
Number of speed levels 14 or 27 14, 28 or 128
Functions function (light) / f1 to f4 f0 / f1 to f8
Additionally you have following possibilities for all types of data formats:
Assigning the data format to locomotive addresses separately for each address. This way the
EasyControl makes it possible to operate locomotives with Motorola and DCC decoders at the
same time.
Creating double tractions.
Assigning names to locomotives, additionally to assigning address numbers. For example: A
locomotive of type BR 89 is assigned address “89” and the name “EMMA”. When applying
names to locomotive addresses, you can find a locomotive by looking for it´s name in the
database, if you forgot its address number.
Driving solenoid accessory decoders
You can operate solenoid accessory decoders (points or switching decoders), which are
compatible with the Motorola or the DCC format. You make the setting for whether operating
solenoid accessory decoders in the Motorola or DCC format either
commonly for all connected decoders or
or seperately for a group of four decoders.
The Motorola format offers 1020 and the DCC format 2040 decoder addresses.
Section 7.4. Driving solenoi d accessory decoders