TAMS MasterControl 40-01007, Руководство пользователя

Страница: 22 / 58

English MasterControl
Page 6.4
6.1. Adjusting parameters in the locomotive menu
Callin g a lo comotive’s address
The parameters entered in the locomotive menu always relate to the locomotive currently
displayed before entering the menu. To call up a locomotive or function decoder, follow these
steps:
Enter the address number using the keypad and
Press # / ok to confirm your input.
An address called for the first time is automatically applied factory settings, which can be found in
the above paragraph.
Locomotive menu
Enter the menu by pressing 0 / menu and turn the speed control knob until you see the menu
point “locomotive menu”.
Locomotive menu
Possible actions:
Navigate to submenu level 1 by pressing # / ok.
Navigate to another menu point in the main menu level by turning
the speed control knob.
Return to normal operation mode by pressing * / esc.
The submenu enables you to:
Search for a locomotive’s name in the database and select it to operate,
Individually apply or change parameters for each decoder and save these changes
Delete names from the database.
Choosing a locomotive or function decode r f rom the database
Select
Possible actions:
Choose a locomotive with # / ok.
Navigate to another menu point by turning the speed control knob.
Go back to the main menu level by pressing * / esc.
# / ok
Select 99
EMMA
Possible actions:
Scroll through your entries in the database by turning the speed
control knob.
Choose a decoder by pressing # / ok. You’ll be returned to
operation mode afterwards.
Hint:
The submenu “Select” lets you check for entries in the database,
which are alphabetically sorted by name. This can help you finding
a forgotten address of a decoder. You can directly choose the
decoder’s name. Your MasterControl then returns to operation
mode and chooses the chosen address as active address.