TAMS MasterControl 40-01007, Руководство пользователя

Страница: 46 / 58

English MasterControl
Page 7.6
Cancelling a doub le traction
3 DCC 0
F
2
To cancel a double traction, enter the address of the locomotive
you want to drive first. Confirm your input by pressing # / ok.
7.4. Dr iving solenoid accessory decoders
To switch points or switching decoders, follow these steps:
Only enter the decoder’s address. Please note: Do not press # / ok after the input. The
MasterControl will otherwise call up a locomotive’s address.
Press the f1 key for the points direction “straight on” or the switching decoder output “on”
alternatively press the f2 key for „branching“ or the switching decoder out put “off”.
Switch ing time
The signal to switch points or a switching decoder is sent as long as you press the functions key.
Nonetheless, the minimum and maximum switching time is limited as set in the menu point
“Points configuration”.
Section 6.4. Subsection Setting switching time of solenoid accessory decoders
Please note: To switch some types of components, that are driven by points or a switching
decoder (such as decouplers) a short impulse is not enough. To avoid problems, please press the
function button as long as needed or adjust the minimum switching time.
Data format of so lenoid accesso ry decoders
The data format applies to all solenoid accessory and switching decoders.
Section 6.4. Subsection Setting standard data format for solenoid accessory decoders