TAMS MasterControl 40-01007, Руководство пользователя

Страница: 27 / 58

MasterControl English
Page 6.9
Register p rogramming
Register
# / ok
Possible actions:
To read or change press # / ok.
Navigate to another menu point of the submenu level 1 by turning
the speed control knob.
Go back to the main menu by pressing * / esc.
Register
1: 99
Please note : The register numbe r
is displaye d on the left, the
register val ue on t he rig ht.
Possible actions:
Reading a register: Enter the register number on the keypad (only
possible, if the cursor is centred on the register number field) and
confirm input with # / ok. The saved value appears in the field
on the right.
Changi ng a Register: Turn the speed control knob (Cursor moves
towards the register value field), enter value with the keypad and
confirm by pressing # / ok. Possible values are: 1,2,3, … 8
Go back to the submenu level 1 by pressing * / esc.
Page programming
Page mode
# / ok
Possible actions:
To read or change press # / ok.
Navigate to another menu point of the submenu level 1 by turning
the speed control knob.
Go back to the main menu by pressing * / esc.
Page mode
32: 99
Please note : The register numbe r
is displaye d on the left, the
register val ue on t he rig ht.
Possible actions:
Reading a register: Enter register number on the keypad (only
possible, if the cursor is centred on the register number field) and
confirm input with # / ok. The saved value appears in the field
on the right.
Changi ng a Register: Turn the speed control knob (Cursor moves
towards the register value field), enter value with the keypad and
confirm by pressing # / ok.
Go back to the submenu level 1 by pressing * / esc.
Main track prog ramming
Main track
# / ok
Possible actions:
To read or change press # / ok.
Navigate to another menu point of the submenu level 1 by turning
the speed control knob.
Go back to the main menu by pressing * / esc.
Main track
1: 0
Please note : The CV number is
displaye d on th e left, the CV
value on t he ri ght.
Please note: The main track programming method only allows you to
change one variable of the last called decoder address. The set value is
not read (Display “0”). After setting a CV variable, the MasterControl
returns to operation mode.
Changi ng a CV: Enter the CV number on the keypad (only possible,
if the cursor is centred on the CV number field), turn the speed
control knob (Cursor moves towards the CV value field), enter
value with the keypad and confirm by pressing # / ok.
Go back to the submenu 1 level without saving changes by
pressing * / esc.