TAMS MasterControl 40-01007, Руководство пользователя

Страница: 29 / 58

MasterControl English
Page 6.11
6.3. Saving and restoring your layout status
Enter the menu by pressing 0 / menu and if needed, turn the speed control knob to navigate to
“Layout status”. The following data is saved, when activating “Save layout status”:
List of active locomotives,
Status of all active locomotive and function decoders,
Setting of points that have been switched after turning on the MasterControl.
The speed levels of all locomotives are set to „0“.
The MasterControl can restore data in two other ways:
Section 7.6. Resetting your system
Section 6.4. Subsection Deleting the configuration
Layout status
# / ok
Possible actions:
To save or restore layout status press # / ok.
Navigate to another menu point of the menu by turning the speed
control knob.
Go back to the operation mode by pressing * / esc.
Save
layout status
# / ok
Possible actions:
To save layout status press # / ok.
To restore layout status turn the speed control knob until “Restore
layout status” is displayed.
Go back to the main menu by pressing * / esc.
Save
#=Yes *=Cancel
Possible actions:
Save the layout status by pressing # / ok. You’ll be taken back to
submenu level 1.
Cancel by pressing * / esc. You’ll be taken back to submenu level
1 without saving.
Hint: Please do not cut power while saving your layout status. If
power is cut, repeat saving.
Restore
layout status
# / ok
Possible actions:
To restore layout status press # / ok.
To save layout status turn the speed control knob until “Save
layout status” is displayed.
Go back to the main menu by pressing * / esc.
Restore
#=Yes *=Cancel
Possible actions:
Restore the layout status by pressing # / ok. You’ll be taken
back to the operation mode.
Cancel by pressing * / esc. You’ll be taken back to submenu level
1 without restoring.