TAMS MasterControl 40-01007, Руководство пользователя

Страница: 43 / 58

MasterControl English
Page 7.3
Adjusting a lo comotive´s speed
216 DCC 15
BR216
Adjust the speed by turning the speed control knob. The highest
possible speed level depends on the data format and the amount of
speed levels assigned to the decoder.
Directly entering a lo comotive´s speed
216 DCC 18
BR216
Instead of setting a locomotive´s speed by turning the speed knob
you can enter the speed level using the keypad. Press go to
confirm the input.
Setting the driving d irection
216 DCC 0
BR216
By pressing down the speed control knob, you change the current
driving direction. The current value will be displayed as an arrow
(not if Motorola I decoders are used). When changi ng the driving
direction, the current speed level is set to “0”, which causes some
decoders to execute an emergency stop.
With the DC mode set for the speed controller, the driving direction
is set by the rotating direction of the speed control knob:
clockwise: driving direction „forwards“,
counterclockwise: driving direction „backwards“.
Switch ing fun ction s f0 / ligh t and f 1 to f4
216 DCC 15
BR216
F
1
F
3
Press one of the buttons function , f1 , f2 , f3 or f4 . If a
function is switched on, it is displayed.
To switch functions when driving in double traction, please see
section 7.3.
Switch ing fun ction s f5 to f8
216 DCC 15
BR216
F
5
DCC decoders only support the functions f5 to f8. To switch the
functions hold down shift (
) while pressing f1 for function f5,
f2 for function f6, and so on.
To display the statuses of the functions f5 to f8 press the shift key.
The display then shows the shift symbol (
)
and the active
functions are shown.