TAMS MasterControl 40-01007, Руководство пользователя

Страница: 47 / 58

MasterControl English
Page 7.7
7.5. Operation with MasterControl and non-central control
devices
As soon as a non-central control device is plugged in, it automatically connects to the
MasterControl. If an address is called up on a controlling device, the MasterControl checks, if it is
locked from external access. If this is not the case, the MasterControl gives control to the
controlling device and transfers the current status such as data format, speed level, driving
direction, status of the functions and the locomotive’s name. Then you can control the locomotive
from the non-central control device. The driving information is transferred to the MasterControl,
which then communicates with the decoder.
Locking an address
As soon as you enter a decoder address, you can take over control from another device. To deny
that enter the address again and confirm your input by pressing # / ok. The locomotive is then
locked and the lock sign (
) is displayed. Entering the address again or entering another turns
the lock off.
Specialities of a double traction
A double traction stays under control of the control device it was established on. The double
traction can’t be taken over by another device. Only if you enter another address on the non-
central control device, is it possible to take over a double traction.
7.6. Resetting your system
By simultaneously pressing the “Stop” and “Go” keys, you reset your system. Press these keys
until the MasterControl displays “Reset”. When releasing the keys, the reset is done:
All functions of locomotive and function decoders are switched off.
All locomotive’s speed levels are set to “0”.
All double tractions are cancelled.
On all connected devices, the last called address is set.
The booster(s) is / are switched off.
Please don’t confuse this reset with the deleting of a configuration (general reset) or restoring the
model railway status.
Section 6.3. Saving and restoring your model railway status
Section 6.4. Subsection Deleting configuration