TAMS MasterControl 40-01007, Руководство пользователя

Страница: 30 / 58

English MasterControl
Page 6.12
6.4. Adjusting parameters of external devices
and changing basic settings
Enter the menu by pressing 0 / menu and if needed, turn the speed control knob to navigate to
“Settings”. The submenu points help you adjust a number of parameters:
Mode for speed level 128.
Mode for speed controller.
The number of connected s88 devices. You can also check the connected devices here.
Short circuit polarity and short circuit sensitivity of the connected boosters.
Baud rate of the serial interface.
Data format of connected solenoid accessory decoder.
Standar d data format of the locomotive and function decoders. You can also apply an
individual data format to each decoder.
Duration of the signal pause in the Motorola format
RailCom Support.
Additionally, you can delete the whole configuration using this menu point (master reset).
Settings
# / ok
Possible actions:
To navigate to submenu level 2 press # / ok.
Navigate to another menu point in submenu level 1 by turning the
speed control knob.
Go back to the main menu by pressing * / esc.
Mode for speed level mode 128
FS128
1:1
Possible actions:
Change the mode for speed level mode 128 by pressing # / ok.
Navigate to another menu point of the submenu level 1 by turning
the speed control knob.
Go back to the main menu level by pressing * / esc.
FS128
1:1
Possible actions:
Choose the mode for speed level mode 128 by turning the speed
control knob.
Info: In speed level mode 128, turning the speed knob to the next
lock alters the speed level by one (mode 1:1). With the mode 1:2
turning the speed knob to the next lock alters the speed level by
two. Further more there are two modes available which allow you
to alter the speed levels in small steps in the lower speed level area
and in bigger steps in the higher speed level area.
progressive
1
speed level
0-20:
1:1 speed level
20-62:
1:2 speed level
62-126:
1:4
progressive
2 speed level
0-10:
1:1 speed level
10-22:
1:2 speed level
22-126:
1:4