TAMS MasterControl 40-01007, Руководство пользователя

Страница: 57 / 58

MasterControl English
Page 11.3
Configura tion variables fo r the DCC format (exert)
CV# CV name Value
(Default value) Explanations
1 Primary address 0 ... 127
(3) The primary address contains a value between 1
and 127. Is the CV#1 equal to 0, the decoder
switches to analog mode.
2 Vstart 0 ... 255
(-) Defines the current powering the engi ne at
minimum speed.
3 Acceleration rate 0 ... 255
(-) Defines the duration of the pause while
switching up to the next higher speed level.
4 Deceleration rate 0 ... 255
(-) Defines the duration of the pause while
switching down to the next lower speed level.
5 Vhigh 0 ... 255
(0) Defines the current powering the engi ne at
maximum speed.
6 Vmid 1 ... 255
(1) Defines the current powering the engi ne at
moderate speed.
7 Manufacturer
version No. 1 ... 255 This is the version number of the decoder’s
internal software.
8 Manufacturer ID e.g. 62 In this case: Tams Elektronik GmbH
9 Total PWM period 0 ... 255
(0) The current powering the electric motors is
facilitated by switching on / off the power. The
interval between those power peeks is called
PMW period. By altering the PMW period, the
individual running characteristics of an electric
motor are changed.
17 + 18 Extended address 1 ... 10239
(-) Defines the address between 1 and 10239, if the
decoder is set to extended addresses.
19 Consist address 0 ... 127
(-) Defines the alternate (second) address of the
decoder .
29 Configuration data
#1 0 ... 255
(-) Defines main properties of the decoder:
Driving direction, amount of speed steps,
switching to analog operation, additional
feedback while in programming mode, choice
of the speed table, primary addresses or
extended addresses.
33 – 46 Output Loc. FL(f),
FL(r), F1-F12 0 ... 255
(-) Contains a matrix indication of which function
inputs control which Digital Decoder outputs.
49 – 64 Manufacturer
Unique 0 ... 255
(-) Reserved for manufacturer unique CV’s.
67 – 94 Speed Table
(only in 28 speed
steps mode)
0 ... 255
(-) A speed table consisting of 28 values for
forward speeds forming a smooth power
curve, whereas each speed step is assigned a
specific engine power value.
A value of “0” is defined as no power, a value
of “255” as maximum power.