TAKASAGO ZX-S-LN Series, Инструкция по эксплуатации

Страница: 52 / 204

Useful Function
------------------------------------------------------------------------------------
49
It is possible to continue to change other setting items without
pressing the “FUNC.” key. In this case, press the “FUNC.” key to
confirm settings once changes are complete.
Variable Internal Resistance（ＺＸ-Ｓ Series Type-LAN
）
This function intentionally generates a voltage drop due
to load current when running in Constant Voltage mode.
This function is capable of approximating an internal
resistance of chemical batteries (during electric
discharge) and I-V characteristics of solar/fuel cells.
Setting Procedures
Press The Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number will display on the top “Number
Display” and parameters on the bottom Number Display.
Select Item Number 72 with the VOLTAGE dial.
Set the Internal Resistance value with the
CURRENT dial.
Range is 0.00Ω～2.00Ω
400LN/LAN ： 0.00Ω ～ 2.00Ω
800LN/LAN ： 0.00Ω ～ 1.00Ω
1600LN/LAN ： 0.00Ω ～ 0.50Ω
Factory default is 0.00Ω (No Internal Resistance)
Press the FUNC. key again to finish.
Confirms settings and returns Number Display to
measurement display mode.
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT PRESET OVP OCP
FUNC.
ALARM RESET
Variable Internal Resistance function is restricted to
only DC operations.
Not suited for approximating transient phenomenon.
Caution

MEMO