TAKASAGO ZX-S-LN Series, Инструкция по эксплуатации

Страница: 173 / 204

Calibration
------------------------------------------------------------------------------------
170
８． Press the FUNC. key and change the top Number
Display to Settings Item 28 with the VOLTAGE dial.
９． Adjust so that the digital multimeter (used for output
voltage measurement) displays “0.00V” with the
CURRENT dial.
１０． Press the FUNC. key to complete offset
calibration of output voltage control with
external resistance (C).
１１．Set external resistance to 0Ω(short).
IN OUT
19
7
外部抵抗
０～１０ｋ
Ω
１２． Press the FUNC. key and change the top
Number Display to Settings Item 29 with the
VOLTAGE dial.
１３． Adjust so that the digital multimeter (used for
output voltage measurement) displays to
“80.00V” with the CURRENT dial.
１４． Press the FUNC. key to complete full-scale
calibration of output voltage control with
external resistance (C).
１５． This completes offset/full-scale calibration of
output voltage control with external resistance
(C).
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
External
Resistance
0～10kΩ
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET