TAKASAGO ZX-S-LN Series, Инструкция по эксплуатации

Страница: 46 / 204

Useful Function
------------------------------------------------------------------------------------
43
Variable Slew Rate
Sets the increasing and falling rate for each
output voltage and output current individually.
■Constant Voltage (CV) Slew Rate
Use when a small transition rate is desired in the
output voltage when using constant voltage.
Range：0.1V/s～160.0V/s
■Constant Current (CC) Slew Rate
Use when a small transition rate is desired in the
output voltage when using constant current.
Range:
400LN/LAN ： 0.01A/s ～ 80.00Ａ/s
800LN/LAN ： 0.1A/s ～ 160.0Ａ/s
1600LN/LAN ： 0.1A/s ～ 320.0Ａ/s
Setting Procedures
Press the Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number will display on the top “Number
Display” and parameters on the bottom Number Display.
Select Item Number 2 with the VOLTAGE dial.
Assign the Startup Priority Mode by setting the
parameter to 2 or 3 with the CURRENT dial.
Set Value 2＝CV Priortiy, Variable Slew Rate
Set Value 3＝CC Priority, Varialbe Slew Rate
The range will vary for the Constant Current(CC) Slew Rate depending
on the number of parallel devices.
Ex: For 400LN/LAN
① 2 Devices：0.1～160.0A/s ⑥ 7 Devices： 0.1～560.0A/s
② 3 Devices： 0.1～240.0A/s ⑦ 8 Devices： 0.1～640.0A/s
③ 4 Devices： 0.1～320.0A/s ⑧ 9 Devices： 0.1～720.0A/s
④ 5 Devices： 0.1～400.0A/s ⑨ 10 Devices： 0.1～800.0A/s
⑤ 6 Devices： 0.1～480.0A/s
Caution

CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
Set to 2 or 3
①ＣＶスルーレート立ち上り
②ＣＶスルーレート立ち下り
電圧（
Ｖ）
→
①
△Ｖ
△ｔ
①
②
②
△Ｖ
△ｔ
時間（s）→
ＣＶ優先モードでスルーレート設定をした例
スルーレート（ＣＶ）＝ （V/S）
△ｔ
△Ｖ
Example of Slew Rate Settings in CV Priority Mode
Time (s)→
① CV Slew Rate Rising
② CV Slew Rate Falling
Slew Rate (CV)
V
olt
ag
e
(
V
)
→