TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 65 / 240

Useful Function
65
Set number of repetition for sequential operation mode
Keep the function key "FUNC." pressed and select "101" for parameter with "VOLTAGE" dial
and set the desired number of repetition with "CURRENT" dial.
0 - endless repetition
1-9999 = 1-9999 repetitions
Set output state at the end of sequential operation.
Keep the function key "FUNC." pressed and select "102" for parameter with "VOLTAGE" dial
and set the desired output state with "CURRENT" dial.
0
＝
OUT OFF
1 = Keep the output state at the end of sequential operation.
Set Preset CV value, Preset CC value, Control contents, and Control time to the sequential operation for
STEP 1.
Keep the function key "FUNC." pressed and select "110" for parameter with "VOLTAGE" dial
and set the desired Preset CV value with "CURRENT" dial.
Keep the function key "FUNC." pressed and select "111" for parameter with "VOLTAGE" dial
and set the desired Preset CC value with "CURRENT" dial.
Keep the function key "FUNC." pressed and select "112" for parameter with "VOLTAGE" dial
and set the desired Control Contents with "CURRENT" dial.
0
＝ OUT OFF
1
＝
STEP
2
＝
SWEEP
Keep the function key "FUNC." pressed and select "113" for parameter with "VOLTAGE" dial
and set the desired Control Time (min.) with "CURRENT" dial.
0-9999 min.
Keep the function key "FUNC." pressed and select "114" for parameter with "VOLTAGE" dial
and set the desired Control Time (sec.) with "CURRENT" dial.
0
～
59.9 sec.
→Continued to next