TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 191 / 240

Calibration
191
7. Set the constant voltage setting value to [ xV ] and the
constant current setting value to [ yA ] and set the
output to ON.
30-200 30-400 60-100 60-200
[xV] 30.00V 30.00V 60.00V 60.00V
[yA] 1.0A 1.0A 1.0A 1.0A
500-12 500-24 1000-6 1000-12
[xV] 500.0V 500.0V 1000V 1000V
[yA] 0.10A 0.10A 0.010A 0.10A
120-50 120-100 400-15 400-30
[xV] 120.0V 120.0V 400.0V 400.0V
[yA] 0.10A 1.0A 0.10A 0.10A
On how to set, see Operating as Constant Voltage
Power Supply under Basic Operations.(page
28)
8. Press the FUNC. key.
9. Turn the VOLTAGE dial to display the setting item
number 25 in the Number Display (voltage).
* At that time, the voltage measured value is displayed in
the Number Display (current).
10. Adjust the CURRENT dial so that the voltage
measured value displayed in the Number Display
(current) is the same as the actual output voltage
value (digital multimeter measurement).
* The figure above is an example of connecting (HX-S-030-200G2)
11. Press the FUNC. key to settle the full-scale
calibration value in the voltmeter.
12. This completes offset/full-scale calibration of
voltmeter.
Set the constant voltage setting value and the
constant current setting value to the original
ones and start using.