TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 193 / 240

Calibration
193
7. Set the constant voltage setting value to [ xV ] and
the constant current setting value to [ yA ] and set
the output to ON.
30-200 30-400 60-100 60-200
[xV] 1.00V 1.00V 1.00V 1.00V
[yA] 200.0A 400.0A 100.0A 200.0A
500-12 500-24 1000-6 1000-12
[xV] 1.0V 1.0V 1V 1V
[yA] 12.00A 24.00A 6.000A 12.00A
120-50 120-100 400-15 400-30
[xV] 1.0V 1.0V 1.0V 1.0V
[yA] 50.00A 100.0A 15.00A 30.00A
See Operating as Constant Current Power Supply
under Basic Operations on how to set. (page
30)
8. Press the FUNC. key.
9. Turn the VOLTAGE dial to display the setting item
number 27 in the Number Display (voltage).
* At that time, the current measured value is displayed
in the Number Display (current).
* The figure above is an example of connecting (HX-S-030-
200G2)
10. Adjust the CURRENT dial so that the current
measured value displayed in the Number Display
(current) is the same as the actual output current
value (digital multimeter measurement).
* The figure above is an example of connecting (HX-S-030-
200G2)
11. Press the FUNC. key to settle the full-scale
calibration value in the ammeter.
12. This completes offset/full-scale calibration of
ammeter.
Set the constant voltage setting value and the
constant current setting value to the original ones
and start using.