TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 61 / 240

Useful Function
61
■ Important note on sequential operation function
①
Please take note that the waveform during SWEEP control is not complete straight line.
SWEEP control is unable to fluctuate exactly in a linear manner. It is fluctuated in steps with the min. setting resolution
of each power supply.
(V
o
lt
a
g
e
/C
u
rr
e
n
t)
(Elapsed time)
Min. Setting
Resolution
Enlarged
Image of SWEEP Control
② Rising time of waveform after OUTPUT control
It requires some time to start OUTPUT in actual at OUTPUT ON state due to characteristic of internal circuit.
Please take note the control time after OUTPUT ON will be not as set.
◎
Reference time to output the desired waveform in actual during OUTPUT control
Startup mode
CV in low-
speed
CV in mid-
speed
CV in high-
speed
CC in low-
speed
CC in mid-
speed
CC in high-
speed
150ms 100ms 50ms 100ms 75ms 50ms
Time to start
OUTPUT in
actual after
OUTPUT ON
(V
o
lta
g
e
)
(Elapsed time)
Set waveform
Actual waveform
STEP cotrol
Rising time
OUTPUT ON
STEP control from 0V to
the desired value at
OUTPUT ON state
Almost no delay in starting OUTPUT
STEP control time