TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 48 / 240

Useful Function
48
[Double-Action Loading]
Set the parameter for FUNCTION settings item 54 to”1”.
(See page 36 Function Settings on how.)
Press the memory key you wish to load from.
The voltage and current values stored in memory will blink in the
Number Display.
(Press the same key again to cancel loading. Pressing a different
memory key at this point will cause the voltage and current values of
the pressed memory key to blink.)
Hold down the memory key to be loaded for more than 1 second.
The light will blink faster until finished. Once loading is complete
the display will return to measurement display mode.
Panel Memory Savable Settings
Keys used to set Savable Parameters
PRESET CV Set Value
CC Set Value
OVP Set Value
OCP Set Value
FUNC. 1 Selection of Startup Mode
2 CV Slew Rate Rising
3 CV Slew Rate Falling
4 CC Slew Rate Rising
5 CC Slew Rate Falling
7 ON Delay Time
8 OFF Delay Time
72 Internal Resistance Settings
Only the OUTPUT ON/OFF and keys mentioned in the setting
procedures can be used.
Memory can be loaded regardless of OUTPUT ON/OFF status.
MEMO