TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 47 / 240

Useful Function
47
Useful Function
Memory
Saves and loads the set values of the voltage, current, and various functions in memories “A”, “B”, and “C”.
Saving in Memory
This function will save the current set values in memory “A”, “B”, and “C”.
Press the STORE key.
The voltage set value will be displayed in the Number Display
(voltage) and the current set value blinks in the Number Display
(current).
(Press the STORE key again to cancel.)
Select destination by holding down Memory “A”, “B”,”C” key for more than 1 second.
Saves current set values.
The light will blink faster until finished. Once saving is complete
the display will return to measurement display mode.
Loading from Memory
[Single-Action Loading]
Set the parameter for FUNCTION settings item 54 to”0”.
(See page 36 Function Settings on how.)
Press the memory key you wish to load from.
The settings stored in memory will take effect.

Continued on next page
Only the OUTPUT ON/OFF and keys mentioned in the
setting procedures can be used.
Values can be saved to memory regardless of OUTPUT
ON/OFF status.
MEMO
Settings Items that can be saved in memory are listed on page 48 “Panel Memory Savable Settings”.
MEMO
If the number of parallel devices (total power) is changed,
the saved content of the panel memory is initialized.
Caution
Only the OUTPUT ON/OFF and keys mentioned in the
setting procedures can be used.
Memory can be loaded regardless of OUTPUT ON/OFF
status.
MEMO