TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 125 / 240

Using via Digital Data Communication
125
HX-compatible Read-Back Commands
This section explains about the HX based command Read-Back commands.
TK0
: Read-Back Set Parameters
Function: Retrieves the output voltage, output current, over voltage, over current, and output ON/OFF status set in
the HX-S-G2 power supply with the specified device address.
Format: TK0
Read-Back Format: A*1,MV*2,MC*3,LV*4,LC*5,OT*6
*1~*6:Read-Back Value
Read-Back Value: *1: Device address of the responded HX-S-G2 power supply
*2:Output Voltage Set Value (Max. no. of decimal places is 1)
*3:Output Current Set Value (For max no. of decimal places, refer to Output Current Range in
page 122)
*4:Over Voltage Set Value (Max. no. of decimal places is 1)
*5:Over Current Set Value (For max no. of decimal places, refer to OCP Current Range in page
120)
*6:Output ON/OFF Status
<Ex.>
A1,TK0
A1,MV10.0,MC35.0,LV33.00,LC220.0,OT0
TK1
: Read-Back Measurement Data (Voltage/Current)
Function: Retrieves measured voltage/current values from the HX-S-G2 power supply with the specified device
address
Format: TK1
Read-Back Format: A*1,*2V,*3A
*1~*2:Read-Back value
Read-Back Value: *1: Device address of the responded HX-S-G2 power supply
*2:Output Voltage Set Value (Max. no. of decimal places is 2)
*3:Output Current Set Value (For max no. of decimal places, refer to Output Current Range in
page 122)
<Ex.>
A1,TK1
A1,0.00V,0.00A