TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 196 / 240

Calibration
196
Offset/Full Scale Calibration of Output Current Monitor (Isolated Output Current
Monitor)
1. Disconnect the load wires and the remote sensing
wires. Connect the digital multimeter to the output
terminal.
Turn the POWER switch ON and OUTPUT OFF in
advance.
Power Supply
+
-
V
+
-
Digital
Multimeter
Calibration Circuit
V
+
-
Digital
Multimeter
1
14
External
Control Connector
Insulation
Control Connector
2
1
2. Set the parameter for FUNCTION item 12 to "0" to
disable Linearity Compensation Function.
On how to set, refer to Linearity Compensation
Function under Useful Functions (page58).
3. Set the constant voltage setting value to [ xV ] and
the constant current setting value to [ yA ] and set
the output to ON.
30-200 30-400 60-100 60-200
[xV] 1.00V 1.00V 1.00V 1.00V
[yA] 0.0A 0.0A 0.0A 0.0A
500-12 500-24 1000-6 1000-12
[xV] 1.00V 1.00V 1.00V 1.00V
[yA] 0.00A 0.00A 0.000A 0.00A
120-50 120-100 400-15 400-30
[xV] 1.00V 1.00V 1.00V 1.00V
[yA] 0.00A 0.0A 0.00A 0.00A
On how to set, see Operating as Constant Voltage
Power Supply under Basic Operations. (page
30)
4. Press the FUNC. key.
5. Turn the VOLTAGE dial to display the setting item
number 34 in the Number Display (voltage).
* At that time, turn off the Number Display (current).
6. Adjust so that the voltage monitor value becomes
"0.00V" with the CURRENT dial.
7. Press the FUNC. key to settle the offset calibration
value of output voltage monitor (isolated output
current monitor).