background image

Pneumatic Brake Bleeder

Model no: 

VS0215

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  Safety

 

9

   Keep this product in good working order and condition, take immediate action to repair or replace damaged parts.

 

9

   Use approved parts only. Unapproved parts may be dangerous and will invalidate the warranty.

 

9

   Keep children and unauthorised persons away from the work area.

 

9

   Keep work area clean and tidy and free from unrelated materials.

 

9

   ensure the work area has adequate lighting.

 

8

  

dO nOt

 use the kit to perform a task for which it is not designed.

 

8

  

dO nOt

 allow untrained persons to use the kit.

 

8

  

dO nOt

 use when tired or under the influence of drugs, alcohol or intoxicating medication.

 

9

   After use, clean equipment and store in a cool, dry, childproof area.

 

9

   dispose of waste liquids in accordance with local authority regulations.

 

9

   Always read and comply with the warnings on the brake fluid container.

 

9

   Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and seek medical    

  advice. If swallowed seek medical advice immediately.

 

‰

  

WarninG!

 Only use new Brake Fluid, used Brake Fluid or other fluids will contaminate the system and possible brake system    

  failure may result.

 

‰

  

WarninG!

 

dO nOt

 pollute the environment by allowing uncontrolled discharge of fluids.

 

‰

  

WarninG!

 Brake fluid is flammable - keep away from sources of ignition, including hot surfaces e.g. exhaust manifold.

 

‰

  

WarninG!

 Brake fluid will damage paintwork. Any spillage should be flushed with water immediately.

 

‰

  

WarninG!

 

dO nOt

 allow the fluid capacity in the unit to fall below ½ litre during the bleeding process otherwise air may enter the  

 system.

 

9

   Always follow the vehicle service manual or consult a trained professional before starting.

 

9

   Make sure the main tube adapter is firmly connected to the container.

 

9

   Before starting, make sure the cap is firmly connected to the container.

 

9

   Follow the recommended pressure in vehicle service manual. 

dO nOt

 exceed 20 psi in order not to damage the vehicles hydraulic  

 system.

 

9

   When the pressure is too high, push the relief button to release the pressure and avoid any danger.

 

8

   Never store the fluid in the container.

2.  intrOductiOn

o

ne-man professional pneumatic brake bleeding tool. Bleeding requires no manual effort only an air line, perfect for the busy workshop. 

Reservoir holds 3ltrs of fluid after extraction, offers a clean method for an automatic discharge at the turn of a valve. Pressure range makes 

unit suitable for use with ABS systems. Reservoir holds 3 ltrs, plenty to flush a whole system without the risk of running dry.

3.  SPecificatiOn

Model no: .................................................................

VS0215

Inlet Size: ..................................................................

1/2”BSP

M

aximum Air Supply:

 ................................................

113.8psi

nett Weight: ..............................................................

1.670kg

Tank Capacity: ..................................................................3ltr

V

S0215 Issue 1 15/11/18

Original Language Version

© Jack Sealey limited

Refer to 

instructions

 Wear eye 

protection

 Wear protective 

gloves

Отзывы: