Suzuki VLR1800, Руководство по обслуживанию

Страница: 498 / 624

4A-6 Brake Control System and Diagnosis:
8) Fill the reservoir with brake fluid to the upper mark of
the reservoir.
9) Install the reservoir cap.
Rear Brake (Combination Brake)
Bleed air from the rear brake (combination brake)
system as the same manner of front brake.
• Bleed air from the rear side (1) first and then the front
side (2).
NOTE
The only difference of bleeding operation
from the front brake is that the rear master
cylinder is actuated by a pedal.
Tightening torque
Front brake caliper air bleeder valve: 6 N·m (0.6 kgf-
m, 4.5 lb-ft)
Rear brake caliper air bleeder valve: 7.5 N·m (0.75
kgf-m, 5.5 lb-ft)
• Fill the reservoir with brake fluid to the upper mark of
the reservoir.
Brake Fluid Replacement
B822H14106008
CAUTION
!
Handle brake fluid with care: the fluid reacts
chemically with paint, plastic, rubber
materials, etc.
Front Brake
1) Place the motorcycle on a level surface and keep the
brake fluid reservoir on a level surface.
2) Remove the brake fluid reservoir cap and
diaphragm.
3) Suck up the old brake fluid as much as possible.
4) Fill the reservoir with new brake fluid.
BF: Brake fluid (DOT 4)
5) Connect a clear hose to the air bleeder valve and
insert the other end of the hose into a receptacle.
I822H1410007-01
I822H1410008-01
1
2
I822H1410009-01
I822H1410010-01
I822H1410011-01
I822H1410012-01