Suzuki VLR1800, Руководство по обслуживанию

Страница: 103 / 624

Engine General Information and Diagnosis: 1A-34
When indicating P1750-L for IAP sensor #2 / When indicating P0105-L for IAP sensor #1 (Use of SDS)
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the fuel tank. Refer to “Fuel Tank Removal and
Installation in Section 1G (Page 1G-8)”.
3) Check the IAP sensor coupler (#2 (1) or #1 (2)) for loose
or poor contacts.
If OK, then check the IAP sensor lead wire continuity.
4) Disconnect the IAP sensor coupler.
5) Check the continuity between the Bl/R wire or G/B wire
and ground.
Also, check the continuity between the G/B wire and B/
Br wire.
If the sound is not heard from the tester, the circuit
condition is OK.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity (
)
Go to Step 2. • R and Bl/R or G/B
wire open.
• Bl/R or G/B wire
shorted to ground.
1
2
I822H1110019-01
(A)
(B)
I822H1110020-01