Suzuki VLR1800, Руководство по обслуживанию

Страница: 401 / 624

Exhaust System: 1K-6
8) Install the pulley (9) to the shaft (10).
NOTE
Make sure that the shaft’s line “A” and cable
slots “B” facing upward as shown.
9) Hold the EXCVA pulley with an adjustable wrench,
and then tighten the pulley mounting bolt (11) to the
specified torque.
Tightening torque
EXCVA pulley mounting bolt (a): 5 N·m (0.5 kgf-
m, 3.5 lb-ft)
CAUTION
!
When loosening or tightening the pulley bolt,
be sure to fix the pulley with an adjustable
wrench, or EXCVA may get damaged.
10) After connecting the No. 2 cable (2), loosen the lock-
nut (12) and turn the adjuster (13) in or until 11 – 12
mm (0.43 – 0.47 in) of the thread length “d” on the
cable adjuster can be provided and tighten the lock-
nut (12).
11) Install the EXCVA.
Tightening torque
EXCV cover bolt (b): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
12) Install the removed exterior parts.
1
2
9
10
“A”
“B”
I822H11B0012-01
(a)
11
I822H11B0013-01
“ d ”
2
12
13
I822H11B0014-01
(b)
I822H11B0015-02