Suzuki VLR1800, Руководство по обслуживанию

Страница: 119 / 624

Engine General Information and Diagnosis: 1A-50
P0115-L (Use of SDS)
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the right air cleaner box. Refer to “Air Cleaner
Element Removal and Installation in Section 1D
(Page 1D-6)”.
3) Check the ECT sensor coupler (1) for loose or poor
contacts.
If OK, then check the ECT sensor lead wire continuity.
4) Disconnect the ECT sensor coupler.
5) Check the continuity between the B/Bl wire and ground.
If the sound is not heard from the tester, the circuit
condition is OK.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity (
)
6) Connect the ECT sensor coupler.
7) Insert the needle pointed probes to the lead wire coupler.
Go to Step 2. • B/Bl wire shorted to
ground.
• If wire is OK, go to
Step 2.
1
I822H1110035-01
(A)
I718H1110054-03