Suzuki VLR1800, Руководство по обслуживанию

Страница: 477 / 624

Drive Chain / Drive Train / Drive Shaft: 3A-19
• Install the final driven bevel gear bearing to the bevel
gear with the special tool.
Special tool
(E): 09951–17010 (Bearing installer)
• Install the correct shims (3) and (4) to the both sides
of the final driven bevel gear and install the gear to the
final gear case.
• Apply bond to the mating surface of the final gear
case and final gear bearing case.
CAUTION
!
Do not block the breather passage when
applying bond.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
• Apply thread lock to the final gear case bolts (5) and
(6), and tighten them to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Final gear case bolt (M8) (a): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Final gear case bolt (M10) (b): 50 N·m (5.0 kgf-m,
36.0 lb-ft)
• Install the inner race (7), washer (8), bearing (9) and
inner race (10) with the special tool.
Special tool
(F): 09913–84510 (Bearing installer)
NOTE
When installing the bearing, stamped mark
on the bearing must face outside.
(E)
I822H1310069-02
3
4
I822H1310072-01
I822H1310073-01
(b)
6
(a)
5
I822H1310074-02
(F)
(F)
7
8
9
10
I822H1310075-03