Chapter 3
Replacing Components
3-19
FIGURE 3-14
Inserting an FB-DIMM Into a Slot
5. Push the FB-DIMM into the connector until the ejector tabs lock the FB-DIMM
in place.
If the FB-DIMM does not easily seat into the connector, verify that the orientation
of the FB-DIMM is as shown in
FIGURE 3-14
. If the orientation is reversed, damage
to the FB-DIMM might occur.
6. Repeat
Step 3
through
Step 5
until all replacement FB-DIMMs are installed.
7. Consider your next step:
■
If you installed FB-DIMMs as part of another procedure, return to that
procedure.
■
If you are only installing FB-DIMMs, see
Chapter 4
for the tasks needed to
bring the server back online.
