Chapter 4
Returning the Server to Service
4-5
FIGURE 4-4
Installing Top Cover
3. Tighten the captive screws on the rear of the cover.
▼
Reinstall the Server in the Rack
The steps you must complete to return the server to the rack depend on the type of
rack and the mounting kit.
●
Refer to the
Sun Netra X4450 Server Installation Guide
for instructions on how
to install the server into the rack.
You can use the instructions in the
Sun Netra X4450 Server Installation Guide
to
finish the installation process, or you can return to this section to finish the
process.
▼
Reconnect the Cables to the Server
1. Reconnect the Ethernet and PCI cables as appropriate.
2. If necessary, reinstall the appropriate cables into the CMA.
3. Reconnect the power cables.
