3-10
Sun Netra X4450 Server Service Manual • August 2008
▼
Install a Hard Drive
1. Remove the replacement hard drive from its packaging, and place it on an
antistatic mat.
2. Align the replacement drive to the drive slot.
The hard drive is physically addressed according to the slot in which it is
installed. It is important to install a replacement drive in the same slot as the
drive that was removed.
3. Slide the drive into the bay until it is fully seated (
FIGURE 3-8
).
FIGURE 3-8
Installing a Hard Drive
4. Close the latch to lock the drive in place.
