Chapter 2
Preparing for Service
2-5
2. Set the server on a sturdy work surface.
3. Prepare an antistatic surface on which to set parts during removal and
installation.
Place ESD-sensitive components such as the printed circuit boards on an
antistatic mat. The following items can be used as an antistatic mat:
■
Antistatic bag used to wrap a Sun replacement part
■
Sun ESD mat, part number 250-1088
■
Disposable ESD mat (shipped with some replacement parts or optional
system components)
4. Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your
wrist and then to a metal area on the chassis.
▼
Remove the Top Cover
All components that are not hot-swappable require the removal of the top cover.
1. Use a No. 2 Philips screwdriver to release the two captive screws (
FIGURE 2-1
).
FIGURE 2-1
Top Cover Removal
2. While pressing the top cover release button, slide the cover toward the rear of
the server.
3. Lift the cover off the chassis, and set it aside.
