Chapter 3
Replacing Components
3-11
5. Close the bezel.
6. Perform administrative tasks to reconfigure the hard drive.
The procedures that you perform at this point depend on how your data is
configured. You might need to partition the drive, create file systems, load data
from backups, or have it updated from a RAID configuration.
3.4
Replacing the Optical Media Drive
The optical media drive in the server is not hot-pluggable. You cannot remove it
while the system is running.
▼
Remove the Optical Media Drive
1. Prepare the server for optical media drive removal.
See
Chapter 2
.
2. Open the bezel.
Caution –
Do not open the bezel on a flat surface. The front of the server must be
hanging over the edge of a flat surface to avoid damaging the bezel hinges.
3. Push the release tab to the left, and pull the probe forward, freeing the optical
media drive (
FIGURE 3-9
).
