3-2
Sun Netra X4450 Server Service Manual • August 2008
3.1
Replacing the Air Filter
Use the procedures in this section to install a new air filter or to remove the air filter
for cleaning.
▼
Remove the Air Filter
1. Press the green tabs on both sides of the bezel, and pull the bezel forward and
down (
FIGURE 3-2
).
Caution –
Do not open the bezel on a flat surface. The front of the server must be
hanging over the edge of a flat surface to avoid damaging the bezel hinges.
FIGURE 3-1
Opening the Bezel
2. Grasp the tabs, and lift the air filter from the bezel (
FIGURE 3-2
).
