Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 94 / 122

4-22 Netra 210 Server Service Manual • March 2006
■
See Section 5.2, “Closing the Bezel” on page 5-3
■
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
■
See Section 5.4, “Powering On the Server” on page 5-6 .
■
See Section 5.5, “Verifying the Installation” on page 5-7 .
4.7 Replacing the Bezel
4.7.1 Removing the Bezel
1. Open the bezel.
See Section 1.5, “Opening the Bezel” on page 1-5 .
2. Using a No. 2 Phillips screwdriver, remove the two screws that secure the bezel
hinge to the chassis.
See
FIGURE 4-29
.
FIGURE 4-29
Removing the Bezel Hinge Screws
3. Grasp the bezel at the hinges, lifting it straight up and then forward, and
unhooking it from the front of the chassis.
See
FIGURE 4-30
.