Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 57 / 122

Chapter 3 System Board Components 3-17
2. Locate the battery.
The battery is located at the left front of the system board.
3. Press the tab at the side of the battery to release it.
See
FIGURE 3-24
.
FIGURE 3-24
Releasing the Battery
4. Lift the battery up and out of the socket.
See
FIGURE 3-24
.
Caution – Do not power on the server without the battery installed.
5. Determine your next steps:
■
If you were directed here by another procedure, return to that procedure.
■
Otherwise, replace the battery.
Go to Step 3 of Section 3.5.2, “Installing the Battery” on page 3-17 .
3.5.2 Installing the Battery
1. Remove the server from the rack and remove the top cover.
■
See Section 1.4, “Removing the Server From the Rack” on page 1-4 .
■
See Section 1.6, “Removing the Top Cover” on page 1-7 .
2. Locate where the battery installs.
The battery installs at the left front of the system board.
3. Remove the replacement battery from its shipping container and antistatic
packaging.