Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 78 / 122

4-6 Netra 210 Server Service Manual • March 2006
FIGURE 4-7
Connecting the Power Supply Cables
7. Press the SAS cables into the clamps on the side of the power supply.
See
FIGURE 4-8
.
FIGURE 4-8
Pressing the SAS Cables Into the Clamps
Note – Press down on the power supply cables to aid when later installing the air
duct.
8. Install fan 4 and 5.
See Section 4.4.2, “Installing Fans 4 and 5” on page 4-11 .
9. Determine your next steps:
■
If you were directed here by another procedure, return to that procedure.
■
Otherwise, install the air duct and top cover, install the server into the rack,
power on the server, and verify the installation.
■
See Section 5.1, “Installing the Top Cover” on page 5-1 .
■
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
■
See Section 5.4, “Powering On the Server” on page 5-6 .