Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 19 / 122

Chapter 1 Getting Started 1-3
1.2 Required Tools
The Netra 210 server was designed to be serviced with the following tools:
■
Antistatic wrist strap
■
No. 2 Phillips screwdriver
See
FIGURE 1-1
.
FIGURE 1-1
Required Tools
Place ESD-sensitive components such as the system board, memory, PCI cards, hard
drives, and the NVRAM on an antistatic mat. The following items can be used as an
antistatic mat:
■
Antistatic bag used to wrap a Sun replacement part
■
Sun ESD mat, part number 250-1088 (available through your Sun sales
representative)
■
Disposable ESD mat (shipped with replacement parts or optional server
components)
1.3 Powering Off the Server
Most procedures require the server to be powered off before proceeding.
Note – If the server is accessed by several users, inform them of your intentions.