Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 10 / 122

x Netra 210 Server Service Manual • March 2006
FIGURE 4-20
Tightening the DVD Assembly Screws 4–16
FIGURE 4-21
Connecting the Cables to the DVD Assembly 4–17
FIGURE 4-22
Installing the Rotary Switch Cap 4–17
FIGURE 4-23
Disconnecting Cables From the SAS IF Assembly 4–18
FIGURE 4-24
Loosening the SAS IF Assembly Screws 4–19
FIGURE 4-25
Lifting the SAS IF Assembly From the Chassis 4–19
FIGURE 4-26
Lowering the SAS IF Assembly into the Chassis 4–20
FIGURE 4-27
Tightening the SAS IF Assembly Screws 4–21
FIGURE 4-28
Connecting Cables to the SAS IF Assembly 4–21
FIGURE 4-29
Removing the Bezel Hinge Screws 4–22
FIGURE 4-30
Lifting the Bezel off the Chassis 4–23
FIGURE 4-31
Identifying the Mounting Tabs of the Bezel Hinges 4–23
FIGURE 4-32
Sliding the Hinges Down and Hooking Tabs 4–24
FIGURE 4-33
Installing the Bezel Hinge Screws 4–24
FIGURE 5-1
Installing the Air Duct 5–2
FIGURE 5-2
Lowering the Top Cover 5–2
FIGURE 5-3
Securing the Top Cover 5–3
FIGURE 5-4
Holding the Bezel 5–3
FIGURE 5-5
Closing the Bezel 5–4
FIGURE 5-6
Beginning to Slide the Server In 5–5
FIGURE 5-7
Securing the Server 5–5
FIGURE 5-8
Powering On the Server 5–6
FIGURE B-1
Gigabit Ethernet Port Pin Numbering B–2
FIGURE B-2
Network Management Port Pin Numbering B–3
FIGURE B-3
Serial Management Port Pin Numbering B–4
FIGURE B-4
Serial Port (l0l0l) Pin Numbering B–6
FIGURE B-5
Alarm Port Pin Numbering B–6
FIGURE B-6
USB Ports Pin Numbering B–7
FIGURE B-7
SCSI Port Pin Numbering B–8