Sun Microsystems Netra 210, Руководство по обслуживанию

Страница: 71 / 122

Chapter 3 System Board Components 3-31
25. Install the power supply.
See Section 4.2.2, “Installing the Power Supply” on page 4-4 .
26. Install fans 4 and 5.
See Section 4.4.2, “Installing Fans 4 and 5” on page 4-11 .
27. Install the SAS IF assembly.
See Section 4.6.2, “Installing the SAS IF Assembly” on page 4-20 .
28. Install the hard drives.
See Section 2.2.2, “Installing the Hard Drive” on page 2-4 .
29. Install the DVD assembly.
See Section 4.5.2, “Installing the DVD Assembly” on page 4-15 .
30. Install the SCC.
See Section 2.4.2, “Installing the SCC” on page 2-11 .
31. Install the DVD module or a filler panel.
See Section 2.3.2, “Installing the DVD Module” on page 2-8 .
32. Install the air duct and top cover, close the bezel, install the server into the rack,
power on the server, and verify the installation.
■
See Section 5.1, “Installing the Top Cover” on page 5-1 .
■
See Section 5.2, “Closing the Bezel” on page 5-3
■
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
■
See Section 5.4, “Powering On the Server” on page 5-6 .
■
See Section 5.5, “Verifying the Installation” on page 5-7 .