Sun Microsystems Blade X6450, Руководство по обслуживанию

Страница: 121 / 162

Chapter 3 Maintaining the Server 3-47
11. Take up any slack in the cable by gently pulling the excess cable through the
center support bracket and towards the right side.
Do not place any strain on the motherboard connectors.
12. Position the four holes in the SSD mounting bracket over the four threaded
standoffs on the motherboard so that the open end of the mounting bracket is
toward the rear of the server (see
FIGURE 3-23
).
The four standoffs are located on the right side of the center support bracket.
FIGURE 3-23
Installation of the SSD Mounting Bracket
The mounting bracket has a cable retaining flange, which is used to hold the cable
in place against the center support bracket.
13. Position the cable behind the retaining flange on the mounting bracket (see
FIGURE 3-23
).
The flange must hold the cable against the center support bracket.