Sun Microsystems Blade X6450, Руководство по обслуживанию

Страница: 122 / 162

3-48 Sun Blade X6450 Server Module Service Manual • May 2009
FIGURE 3-24
Installation of the SSD
14. Using a #2 screwdriver and the four shorter screws (M2.5 x 4.5L), fasten the
mounting bracket to the threaded standoffs on the motherboard.
You must use the shorter (M2.5 x 4.5L) screws. Take care that the cable does not
slip away from the retaining flange.
15. Insert the SSD into the mounting bracket so that the screw holes in the SSD
face upward (see
FIGURE 3-24
).
16. Align the four screw holes in the SSD with the four holes in the mounting
bracket, and fasten the SSD to the mounting bracket using the four remaining
(longer) screws (see
FIGURE 3-24
).
Use the longer (M2.5 x 5L) screws.
17. Attach the cable to the SSD connector (see
FIGURE 3-24
).
The connector is keyed, so there is only one way to attach the connector correctly.
18. If necessary, install the optional Sun Blade RAID Expansion Module (see “To
Install a RAID Expansion Module” on page 3-35 ).
19. If necessary, install the optional fabric expansion module (see “To Install a
Fabric Expansion Module” on page 3-40 ).
You might need to position the SSD power and SATA cables to limit contact with
the underside of the expansion module.
Cable-Retaining
Flange