Sun Microsystems Blade X6450, Руководство по обслуживанию

Страница: 120 / 162

3-46 Sun Blade X6450 Server Module Service Manual • May 2009
6. If necessary, remove and retain the optional fabric expansion module (see “To
Remove a Fabric Expansion Module” on page 3-42 ).
7. Remove the cable, the SSD mounting bracket, the SSD, and the two packets of
screws from the packaging.
The SSD packaging contains two sets of screws, one set of (shorter) M3 x 4.5L
screws, which are used to fasten the SSD mounting bracket to the motherboard
and one set of (longer) M2.5 x 5L screws, which are used to fasten the SSD to the
SSD mounting bracket.
8. Route the cable through the large rear-most opening in the center support
bracket so that the end of the cable with two connectors is on the left side of the
bracket (see
FIGURE 3-22
).
The two ends attach to connections on the left side of the motherboard.
9. Press the larger of the two cable ends (SATA data) into the black connector on
the motherboard labeled “SATA” (see
FIGURE 3-22
).
The connection is keyed for proper installation.
10. Press the other end of the cable (SSD power) into the white connector labeled
JP5 (see
FIGURE 3-22
).
FIGURE 3-22
SSD Cable Routing and Connectors