Sun Microsystems Blade X6450, Руководство по обслуживанию

Страница: 137 / 162

Chapter 4 Performing Diagnostic Tests 4-11
3. When you are done, select Save Burn-In Script and type the name for the new
script.
Enter
d:\
testname
.tst
Where testname is the name of the script that you have created.
4. To run the newly created script, go to Immediate Burn-In Testing in
Section 4.5.1, “Performing Immediate Burn-In Testing” on page 4-9 , and run the
script testname.
tst
.
4.6 Show Results Summary
Selecting Show Results Summary on the Diagnostics main menu displays the tests
that have been run and lists the results, which can be Pass, Fail, or N/A.
The following list describes all the tests that are available with the Tools and Drivers
CD. If your system does not have the corresponding option, the results will show as
N/A in the Show Results Summary list.
■
Processor
This section shows the following tests conducted against the processor: Core
Processor Tests, AMD 64-Bit Core Tests, Math Co-Processor Tests – Pentium Class
FDIV and Pentium Class FIST, MMX Operation, 3DNow! Operation, SSE
Instruction Set, SSE2 Instruction Set, and MP Symmetry.
■
Motherboard
This section shows the following tests conducted against the motherboard: DMA
Controller Tests, System Timer Tests, Interrupt Test, Keyboard Controller Tests,
PCI Bus Tests, and CMOS RAM/Clock Tests.
■
Memory, Cache Memory, and Video Memory
This section shows the following tests conducted against the various types of
memory: Inversion Test Tree, Progressive Inv. Test, Chaotic Addressing Test, and
Block Rotation Test.
■
Input Device
This section shows the following tests conducted against the input device: Verify
Device, Keyboard Repeat, and Keyboard LEDs.
■
Mouse
This section shows the following tests conducted against the mouse: Buttons,
Ballistics, Text Mode Positioning, Text Mode Area Redefine, Graphics Mode
Positions, Graphics Area Redefine, and Graphics Cursor Redefine.
■
Video