Sun Microsystems Blade X6450, Руководство по обслуживанию

Страница: 130 / 162

4-4 Sun Blade X6450 Server Module Service Manual • May 2009
TABLE 4-1
describes the selections in the System Information menu.
TABLE 4-1
System Information Menu Options
Option Description
System Information Menu Includes basic information about your system,
motherboard, BIOS, processor, memory cache, drives,
video, modem, network, buses, and ports.
Hardware ID Image Menu Enables you to create an XML or
.txt
document
showing your system’s hardware ID.
System Management Info Provides information about the BIOS type, system,
motherboard, enclosure, processors, memory modules,
cache, slots, system event log, memory array, memory
devices, memory device mapped addresses, and system
boot.
PCI Bus Info Includes details about specific devices from
pci-config
space within the system, similar to the
System Management Information section.
IDE Bus Info Displays information about the IDE bus.
Interrupt Vectors Displays a list of interrupt vectors.
IRQ Information Shows hardware interrupt assignments.
Device Drivers Shows device drivers loaded under Open DOS.
APM Information Enables you to test and configure the Advanced Power
Management (APM) capabilities of the system. You can
choose to change the power state, view the power
status, indicate CPU usage, get a power management
event, or change the interface mode.
I/O Port Browser Shows the I/O port assignment for the hardware
devices on the system.
Memory Browser Enables you to view the mapped memory for the entire
system.
Sector Browser Reads sector information from the hard disks sector by
sector.
CPU Frequency Monitor Tests the processor speed.
CMOS RAM Utilities Shows the CMOS settings of the system.
Text File Editor Opens a file editor.
Start-Up Options Enables you to set up startup options for diagnostics
testing.