Sun Microsystems 817-4054-15, Руководство по обслуживанию

Страница: 155 / 204

Chapter 10 IB_SSC Assembly 10-5
11. From the right of the system, unlock the ejector levers on the IB_SSC assembly
with a Phillips no. 2 screwdriver (
FIGURE 10-4
).
The ejectors will pop out slightly.
FIGURE 10-4
Unlocking the IB_SSC Assembly Ejector Levers
12. Raise the ejector levers simultaneously until they are 90 degrees straight out from
the board.
This action unseats the board from the connector on the baseplane.
13. Grasp the ejector levers and pull to raise the IB_SSC assembly until the green
panels are visible (
FIGURE 10-5
) .
The antigravity clutch holds the IB_SSC assembly in position so that it can be
released without the board sliding down into the system.
Note – Any green part is a part that you can touch.